Helix P TWO

Output power RMS / max.

- @ 4 Ohms 2 x 280 / 560 Watts

- @ 2 Ohms 2 x 490 / 980 Watts

- @ 1 Ohm -

- bridged @ 4 Ohms -

- bridged @ 2 Ohms -

Amplifier technology Ultra HD Class D

Inputs 2 x RCA / Cinch

2 x Highlevel speaker input

1 x Optical SPDIF (28 - 96 kHz)

1 x Remote In

1 x Remote control input

Input sensitivity RCA / Cinch 2 - 8 Volts

Highlevel 5 - 20 Volts

Input impedance RCA / Cinch 10 kOhms

Input impedance highlevel 13 Ohms

Outputs 2 x Speaker output

Output voltage RCA / Cinch -

Signal converter for digital input BurrBrown 32 Bit DA converter

Frequency response 10 Hz - 40,000 Hz

Bass boost 0 - 9 dB / 40 Hz - 120 Hz

Highpass 15 Hz - 4,000 Hz regelbar

Lowpass 15 Hz - 4,000 Hz regelbar

Bandpass 15 Hz - 4,000 Hz regelbar

Subsonic -

Phase -

Slope high- / lowpass Butterworth 12 dB/Oct.

Slope subsonic / lowpass -

Signal-to-noise ratio digital input 105 dB (A-weighted)

Signal-to-noise ratio analog input 105 dB (A-weighted)

Distortion (THD) < 0.005 %

Damping factor > 200

Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)

Idle current 2400 mA

Fuse 3 x 30 A LP-Mini-fuse (APS)

Additional features Active, adjustable crossover, bass boost, input mode switch, highlevel input with Advanced Diagnostics Error Protection (ADEP), Auto Remote switch, SPDIF Direct In switch, cable remote control for volume adjustment

Dimensions (H x W x D) 50 x 260 x 190 mm /

1.97 x 10.24 x 7.48”