Aznar Electronica


HELIX-AMPLIFY-206-DIRECT

No Disponible

HELIX-AMPLIFY-206-DIRECT

359,00 €

Producto Disponible - (Imp. Incluidos)

Marca: Helix



Amplificador muy compacto de 5/6 canales con entrada DirectDSP “hecho para HELIX DSP”



Technical data

Power RMS ≤ 1% THD+N @ 14.4 V
- @ 4 Ohms6 x 100 Watts
- @ 2 Ohms6 x 190 Watts
- @ 1 Ohm-
- bridged @ 4 Ohms3 x 380 Watts
- bridged @ 2 Ohms-
Max. output power per channel*Up to 240 Watts RMS @ 2 Ohms
Up to 480 Watts RMS @ 4 Ohms bridged
Amplifier technologyClass D
Inputs6 x RCA / Cinch
1 x Remote In
Input sensitivity1 - 8 Volts
Input impedance6 kOhms
Outputs6 x Speaker output
Output voltage RCA / Cinch-
Signal converter for digital input-
Frequency response10 Hz - 22,000 Hz
Bass boost-
Highpass-
Lowpass-
Bandpass-
Subsonic-
Phase-
Slope high- / lowpass-
Slope subsonic -
Slope subsonic / lowpass-
Signal-to-noise ratio (A-weighted)103 dB @ full power
Distortion (THD @ 1 kHz, 1 W into 4 Ohms)< 0.003%
Distortion (THD+N @ 1 kHz, 1 W into 4 Ohms)< 0.015 %
Distortion (THD @ 100 Hz, 1 W into 4 Ohms)-
Distortion (THD+N @ 100 Hz, 1 W into 4 Ohms)-
Damping factor70
Operating voltage10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
Idle current1,100 mA
Fuse3 x 25 A LP-Mini-fuse (APS)
Power ratingDC 12 V ⎓ 93 A max.
Operating temperature range-40 °C to +70 °C
Additional featuresStart-Stop capability, Clipping LED, DirectDSP inputs
Dimensions (H x W x D)40 x 263 x 114 mm /
1.58 x 10.35 x 4.49”

* One channel driven (≤ 10 % THD+N @ 14.4 V)

Scope of delivery

1 x Amplifier HELIX AMPLIFY 206 DIRECT
2 x Allen key
1 x Mounting material
1 x Connection cable
3 x Fuse
1 x Instruction manual

Enlace

https://www.audiotec-fischer.de/en/helix/amplifiers/amplify/2-series/206-direct