HELIX-IK-S10-DVC2

Altavoz de subgraves poco profundo de 250mm / 10'' con bobina móvil de 2 x 2 ohmios o 1 x 2 ohmios para recintos compactos Descripción del producto Technical data IK S10-DVC2 – 2 x 2 Ohms Power handling RMS / max. P 300 / 600 Watts Impedance Z 2 x 2 Ω DC resistance Re 2 x 1.6 Ω Resonance frequency Fs 34 Hz Mechanical Q factor Qms 6.37 Electrical Q factor Qes 0.49 Total Q factor Qts 0.45 Compliance Cms 198 μm/N Equivalent air volume Vas 34 L Force factor B*I 12.7 Tm Sensitivity SPL 90.0 dB @ 2.83V / 1m 87.0 dB @ 1W / 1m Cone area Sd 353 cm² Moving mass Mms 112 g Cone material Sandwich paper cone Mechanical resistance Rms 3.73 kg/s Voice coil diameter ø 50.8 mm Voice coil winding height 18 mm Max. linear excursion Xmax +/- 6.0 mm Outer diameter ø 262 mm / 10.31" Installation diameter ø 229 mm / 9.01" Installation depth 84.5 mm / 3.33" Recommended enclosure volumes Sealed box Net volume 14 L Lower limiting frequency (-3dB) 46 Hz Recommended DSP settings Recommended "self-define" highpass filter with 45 Hz cut-off frequency and Q = 1.3; additional EQ filter 100 Hz / Q = 1.0 / -3 dB Vented box Net volume 16 L Port diameter ø 70 mm / 2.76" Port area 38 cm² Port length 38 cm / 14.96" Port tuning frequency Fb 37 Hz Lower limiting frequency (-3dB) 39 Hz Recommended DSP settings Recommended "self-define" highpass filter with 37 Hz cut-off frequency and Q = 1.2; additional EQ filter 95 Hz / Q = 0.7 / -3 dB Scope of delivery 1 x Subwoofer HELIX IK S10-DVC2 1x Grille 1 x Gasket 1 x Enclosure connecting terminal 1 x Data sheet ENLACE https://www.audiotec-fischer.de/en/helix/subwoofers/ik-s10